JGA20-180 Carbon Brush Long Life Micro Reduction Motor Ultra Low Speed Motor Large 12v 6v(60 RPM)

Model: JGA20-180Voltage range: 6-24VOutput shaft, motor speed and voltage can be Main uses: instrumentation, digital products, , security monitoring, intelligent door locks, curling irons.Reduction ratio: 25, 31. 50, 63. 78. 100,125. 156, 195, 200, 250, 312, 390,Precautions for motor use:1. Confirm that the motor voltage is correct before use, and if it is a motor, confirm whether the power supply current is sufficient2. It can not be overloaded, the cause of overload is mainly divided into two parts, and shaft force, load can not exceed the motorThe rated , the force of the shaft can not exceed the axial and radial allowable force of the shaft, and the measured current of the motor cannot be after the load is addedWhen using a motor that exceeds the rated current,- - it must be equipped with a fuse to avoid overloading and burning the motor3. Do not store or run in high temperature or humid environment, and do not place corrosion gas, which will reduce the effect of the motor4. When the motor shaft is equipped with transmission parts such as gears and pulleys, do not knock abnormally when pressed in5. When solder is to be soldered on the motor terminals of the positive and negative poles of the power supply, the temperature of the soldering iron is 340 °C and 40 °C, and the heating time is within 3 secondsDo not deform the plastic, in the work, let the solder point flow into the motor or break the end of the wire, which will make the motor function weakened6. When installing the motor, pay attention to whether the screw is too long, and prevent the too long screw from touching the parts inside the motor========== : 12vModel Number : 480 rpmContinuous Current(A) : 12vOutput Power : 480 rpmOrigin : Mainland Certification : none

• JGA20-180 Carbon Brush Long Life Micro Reduction Motor Ultra Low Speed Motor Large 12v 6v